LATEST NEWS!!
		2008.11.18 : SYSTEMA to Announce Revolution Detail Soon!
		The long, long wait is finally over... we've just got words that SYSTEMA will be releasing detailed information (including release schedule) for the highly anticipated Revolution!!  We will update with the latest info once we have SYSTEMA's announcement in-hand.  We will also expect to have a production Revolution on display during the 2009 Shot Show, and accept pre-order shortly.  Stay tuned!
		2008.10.10 : SYSTEMA TW5 and TW5-MAX Now In-Stock!
		Following the success of the original SYSTEMA TW5, as well as the tremendous response we received from the recently introduced TW5-MAX, we are pleased to announce that the initial demand has finally stabilized.  As of this writing, all pre-orders from our U.S. dealers have been filled and we now have enough TW5 (and related accessories) either in-stock or en-route for immediate delivery. Furthermore, we'd like to take this opportunity to answer a few questions on the TW5 that many enthusiasts have e-mailed us about.  First of all, the TW5 and TW5-MAX does share identical exterior components.  Unlike our M4/M16 product line, where the MAX-series uses stronger polymer, all TW5s uses high-strength fiber-reinforced polymer for all the non-metal exterior components (such as lower grip-frame, hand guard, stock etc).  They also share the same barrel, motor, electronics, and basic mechabox design; as well as the highly sought-after 4-position electronic trigger (SAFE/SEMI/BURST/AUTO).  That being said, the main differences between the TW5 and TW5 MAX are: 1. TW5-MAX employs a new, stronger Main Sector Gear. 2. TW5-MAX employs a modified Spur Gear that has a slightly higher gear ratio. 3. Instead of the M90 cylinder, TW5-MAX comes with an M150 (~500FPS) cylinder unit. Obviously, due to the reinforced gear set and different gear ratio, the TW5-MAX can utilize M150 cylinders effectively, whereas only M130 (or lower) cylinders are recommended for the TW5.  Furthermore, when the M150 cylinder is used, a SYSTEMA 12v 2400mAh battery is required.  Other then that, the TW5 and TW5-MAX are virtually identical in many aspects. Finally, we have also make a very slight change to all the TW5 cylinders, to improve compatibility with the TW5-MAX's new gear sets.  Basically, one of the grooves cut into the cylinder cashing is now very slightly deeper.  You may still use the older cylinders safely with a TW5-MAX, its just that occasionally the new spur gear would rub on the cylinder's case.  Our engineers have determined that the occasional rubbing has no detrimental impact to the TW5's operation or reliability, the worst that could happen is the paint on the cylinder case (inside the groove) got rubbed off.  So please feel free to mix them up, any version of the cylinders will work with any variation of the TW5.  Nonetheless, if you have an older cylinder and insist to have it updated, you can special order the new cylinder casing from your favorite PTW dealer.   In closing, regardless of which version you decided to own, we are certain that they will provide years of reliable service for our users.  Please visit your local Official SYSTEMA Dealer to experience the new TW5 first-handed! Note:  We've recently noticed some confusion in the community, in regards to our model naming.  Please note that our internal reference, as well as official model number, is "SYSTEMA TW5" — where "TW5" stands for "Training Weapon Model-5".  Some users have referenced our product as the "SYSTEMA MP5" or "SYSTEMA PTW MP5" which are both incorrect.
		2008.10.01 : SYSTEMA Introduces RoHS-Compliance PTW M4 Batteries
		In an effort to protect our environment, SYSTEMA have recently revised the construction method of all M4-style batteries to use lead-free solders exclusively.  Unfortunately, as part of the initiative the solid copper bar (that is used to connect the batteries) could not be utilized anymore.  Since many of the users did not understand why the copper bar is abandoned, we asked SYSTEMA's engineer for an answer. In short, if we must continue to use the copper bar together with lead-free solder, we could see as much as 30% reduction in battery life, as well as significantly reduced "cycle life".  Although this seems odd to us at first, once we read the detailed report it is not difficult to understand. As the engineers explained, the main culprit here is heat.  In the past, when soldering the the copper bar directly onto the terminal, we were able to keep the cell's temperature in-check by using a "heat spreader jig" (think of it as a giant heat-sink for the battery).  However, when we experiment with lead-free solders, due to their considerably higher melting point even with the heat-spreader we would still find overheating to occur frequently on the cells that are directly being soldered.  Without going too much into the chemistry behind it, overheating a cell physically damages it causing its energy storage capacity to be reduced permamently.  To make the matter worse, since only 2 of the cells in the battery pack is affected, deep-discharging the battery may even cause "voltage reversal" (another term that I won't go into too much detail here).  The combination of overheating and voltage reversal will significantly degraded the battery's performance and reliability. As a result, the copper bar is now replaced by a spot-welding two metal taps, pre-connected with a high strength wire, directly on the terminals.  Although high current spot-welding is a very desirable construction method of battery packs, unfortunately the new design is not as "rigid" and could not withstand abuses as readily as the old design. Nonetheless, as you can see the choice was not easy.  Obviously, ignoring environmental concerns and sticking with the old construction process is not a very good option.  However, sacrificing performance isn't acceptable either.  Thus, at the end we took the compromise in order to maintain battery performance.  Since most PTW users put performance as their top priority, we believe this is the most sensible option.  I hope your opinion will be the same!
		2008.04.21 : Clarification of the PTW FPS-Up Kit
		We would like to take this opportunity to clarify that our previous news release, "PTW FPS-Up Kit", was indeed intended as an "April Fools' Day" joke.  We will further confirm that as of its writing, there were no plan to offer such "upgrade kit" that allows users to "F-Up" their PTW or Cylinders.  Therefore, please rest assure that your PTW is safe for the moment.  As to many users who e-mailed us asking if we could actually "made it real", the matter is currently "undecided".  One thing is certain though - if we do want to bring this product to life, we will likely have to manufacture and distribute it under the ZShot brand name (not from SYSTEMA Co.), and that a lot of additional research will be required. Furthermore, I would also like to apologize to anyone who had taken the previous release offensively.  We just realized that many non-English speaking users may not "get the drift" (as the joke could not be easily translated).  In addition, we'd like to publicly apologize to SYSTEMA Co. as well, whereas we've used their product packaging as the background in the original image without obtaining prior approval.  SYSTEMA Co. (Japan) was not involved in our prank and was not aware of the news release beforehand; therefore they have no knowledge of this "product" nor have any plan to offer it in the future.  However, we seems to have caused quite a commotion in the market (especially among those who thought this was real) that some users had mistaken our joke as a "genuine product" offered by SYSTEMA Co. - which is not true.  In light of that, we decided to change the picture in our previous news release to avoid future confusion. Please do not contact them (SYSTEMA Co.) asking for the "FPS-Up Kit".  Our "fake" little news is solely intended to bring some humor to our life. Thank you! Wallace Lau ZShot.com
		2008.04.01 : ZShot.com Introduces the PTW FPS-Up Kit
		Due to popular request, ZShot.com is proud to present the long-awaited FPS-Up Kit for SYSTEMA PTWs!  Have you ever wonder why there is not an "M100" cylinder or "M120" cylinder?  Do you feel like the blue cylinder is a bit too weak, and the gold cylinder a bit too strong?  Do you long for the perfect PTW that gives exactly 400FPS performance, but couldn't find a way to "up" your FPS just slightly?  Your wait is now over!  With the new "FPS-Up Kit" (F-Up Kit for short), you can now tune each cylinder's output to your heart's content!  The ZShot.com F-Up Kit consists of five (5) precision-made, 1mm thick stainless steel spacers that are custom-cut to our exact specifications. When installed over the base of PTW cylinder's spring guide, the F-Up Kit slightly increases compression (and therefore spring rate) in your cylinder, translating to as much as 10% improvement in muzzle velocity.  This is by far the quickest, cheapest, and easiest way to F-Up your cylinder, bar none!!  Furthermore, you can install anywhere from just one to all 5 of the precision spacers over your spring guide, which gives you lots of flexibility to F-Up your cylinder to different levels. This allows customization never before possible in the history of PTWs.  You can F-Up your PTW however way you want! This exciting FPS-Up Kit will be available at your PTW dealer starting this week for only $29.95 MSRP. Please do not miss this great chance to F-Up your cylinder collection! The ZShot.com FPS-Up Kit. Guaranteed to F-Up your PTW! * Please note that due to the complexity of the PTW cylinder, if you are not comfortable with the disassembly, your trusted SYSTEMA dealers will be more then happy to F-Up your PTW for you. Furthermore, to prevent dirt from entering your cylinder, it is recommended that you please do not F-Up in the field (use common sense). ** Our extensive testing in-house shows that the F-Up Kit is a perfectly solid and safe way for any of our customers to F-Up their PTW(s). Please use it without reservation!! (Warranty void after application.) *** If you haven't caught on yet, this news release is dated April 1st.
		2008.03.19 : SYSTEMA Training Weapon Model-5 Release Imminent!
		Today we bring you exciting news regarding the highly anticipated PTW Model 5 Training Weapon!  SYSTEMA is very pleased to inform us that production is on-schedule, and final release is imminent.  Current tentative schedule points to end-of-March release date, with U.S. delivery expected to begin on the first or second week of April.  Final U.S. Pricing for the new Training Weapon is as follow, and as soon as we received our first production run we will update with more information.   U.S. MSRP E.S.P. Training Weapon Model 5-A4 $1,295.00 $995.00 40 Round Magazine 49.95 39.95 40 Round Magazine, 8-Pack 299.95 269.95 9.6v 2400mAh Battery 79.95 69.95 M90 Cylinder Unit (TW5-Specific) 209.95 179.95 M110 Cylinder Unit (TW5-Specific) 209.95 179.95 M130 Cylinder Unit (TW5-Specific) 229.95 189.95 Finally, since there will only be 300 units (globally) for the first production lot, and the next production lot (scheduled for end of April) will be equally limited in quantity, we expect supply will be extremely short for the next few months.  Therefore, please visit your favorite U.S. Official Dealer and reserve yours soon!! *Note: E.S.P. = Estimated Street Price.  Pricing may vary based on other factors.  Please check with your local dealer for actual pricing near you.  Pricing shown here are for reference only.
		2008.02.18 : Exclusive Revolution Preview at Redwolf Airsoft
		During Shot Show 2008 we demonstrated the Revolution to a good deal of enthusiasts as well as manufacturers / partners, and we were glad to report that market reactions were far more positive then we had anticipated!  In addition, our trusted distribution partner Redwolf Airsoft (Asia, UK and part of Europe) had just posted an exclusive preview of the highly anticipated Revolution Mecha Box.  Please check it out! (You may also want to visit our own Revolution section, which contains the updated FAQ as well.)
		2008.01.31 : Prepare for the Revolution!
		Buckle your seatbelt, as the Revolution is going to hit hard.  SYSTEMA is proud to announce new development of a revolutionary gearbox system that will bring AEG performance level to new heights.  Be prepared to experience the SYSTEMA Revolution! *Note: To arrange a private preview of the Revolution Prototype during the 2008 SHOT Show, please e-mail Sales@ZShot.com and include your contact information for an appointment.  Please keep in mind that due to the nature of this product, not all SYSTEMA staff is aware of its existence and the prototype will not be kept in our booth.  So please do not just stop by the booth and ask for the Revolution; you'll end up confusing some of our staff.  Thank you!
		2007.12.20 : ZShot.com Holiday Bonus Promotion
		To celebrate the holiday as well as an awesome year for all PTW supporters, ZShot.com is pleased to announce our annual year-end promotion for 2007!  This year, qualified end users who purchases a PTW-MAX from an Official SYSTEMA U.S. Dealer between December 15th, 2007 and January 15th, 2008 can submit a Holiday Bonus Request (aka rebate) and receive PTW accessories of his/her choice (up to US$269 value)!  Your bonus could be cylinders, batteries, or extra magazines.  Please visit this link for more information and make sure to spread the news and tell all of your friends!
		2007.03.28 : New PTW Accessories Now Available for Pre-Order!
		In conjunction with the new release of the M733-MAX, SYSTEMA is pleased to announce two new accessories for existing PTW owners who refuse to miss-out on the latest and greatest!  First item is our brand-new PF-490 motor, using many of the innovations found on the popular Magnum and Turbo motors.  Their initial deployment in the M733-MAX has received rave reviews from users and professional trainers alike, so we decided to release them as upgrade parts for existing PTW owners.  These new PTW motors are divided into two specialized versions: Type-A and Type-B.  Type-A is geared towards extreme performance with the highest possible torque and RPM, whereas Type-B is designed specifically for the mainstream training market where power consumption must be taken into consideration seriously due to possible days-long training exercises.  To read more on the technical details of these exciting motors, please download the whitepaper here. Second item from the list is a vastly improved collapsible stock butt plate.  Two oversized, spring-loaded retention locks, CNC-machined out of solid aluminum, lock the butt plate in place with absolute authority and zero guess-works.  However, one easy squeeze on the side-buttons will instantly release the butt plate from the stock.  Many of our professional trainers were heavily involved in this design revision, and so far their feedback has been excellent.  Therefore, after much deliberation we have decided to formally release them for competition use as well.  We are sure you will like it.     U.S. MSRP for these exciting new products are US$295 for both PF-490 motors, and US$59.95 for the new battery butt plate, respectively.  Please contact your nearest official SYSTEMA dealers as we are already accepting dealer pre-orders!
		2007.03.13 : SYSTEMA Introduce the M733-MAX
		To celebrate the first anniversary of launching our 2007-model PTW, SYSTEMA is proud to present the limited-edition PTW M733.  This item will be limited to 190 units world-wide, and is a must-have for both PTW collectors, training partners, and enthusiasts alike.  We are confident that the the M733 configuration will satisfy many who prefer simplicity over extravagent. Key feature of the PTW M733 MAX: 1. Built upon the proven MAX platform with M150 (150 meter/second, ~500FPS) initial muzzle velocity. 2. 11.5 inch Exclusive Steel Outer Barrel, faithfully replicating the M733 configuration. 3. Real DPMS hand guard used for authentic look. 4. Enhanced tight-bore inner barrel. 5. Enhanced high-performance Type-490 motor. Please contact your local SYSTEMA dealer or training provider for evaluation sample, pricing, and availability!
		News Archieve: 2006 and Prior